full height turnstile, servo motorized turnstile, turnstile core kit, turnstile core mechanism, full automatic full height turnstile
servo motorized turnstile core kit core kit
Servo motorized full height turnstile for bi-directional access control with enhanced fail-safe features. When input signal received, motor will bring you pass easily without pushing the arm all the time which makes your passage more convenient.
In emergency situations or power off, the passageway is in free pass mode for free exit (type 1 mechanism only). When power supply is restored or emergency signal suspended, the arms automatically return to their normal operating position. Motorized arms provide comfortable passage while maintaining a high level of crowd control and pedestrian flow management.
This kit is designed for 100% duty duty applications and intensive pedestrian movement areas, indoor or outdoor solution for game park, bus station, train station, stadium, large factory or any site with high traffic flow.
| Description | Parameters |
| Power | AC100~240V, 50/60Hz |
| Motor/Rate Power | DC servo Motor, 40W/24V |
| Housing material | #304,Stainless steel, 1.5mm |
| Passing Speed | 35-50person/min, adjustable |
| Input signals | 100ms<Pulse <3s |
| Temperature | -25℃-75℃ |
| Communication | RS485 |
| MTBF | More than 10 millions |
| Relative Humidity | <95% |
Compared to traditional turnstile, our turnstile are anti-crash and anti-panic, when passenger try to push arm to pass without authorized, arm will auto lock in a degrees to prevent anti-crash and then auto back to correct position automatically. [Type 1 mechanism with clutch only]
DC Servo motor doesn’t need a carbon brush while brush motor request you replace the carbon brush in a certain time. Galvanized and stainless parts are anti-rust ensure long term usage.
With a very smooth and quiet motorized drive mechanism, our turnstile allows 24 hours/ 7 days continuous operation.
Our turnstile allows you to set the passing (arm rotating) speed according to requirements. When used in high flow sites, you can adjust the speed faster.
Access Reader or Push button can be used to trigger the turnstile to open via a simply dry contact signal. After delay timer elapsed, turnstile will close automatically by itself in a certain time(this time can be set from 3-60 seconds).
Motorized rotor provide comfortable passage while maintaining a high level of crowd control and pedestrian flow management
Our turnstile control board has an emergency interface left for the emergency signal. Turnstile will open in case of the signal lasting.
Rotor will be free pass upon loss of power or in emergency situations, the passageway is a free exit. When power supply is restored or emergency signal suspended, the rotor automatically return to their normal operating position.
